This International Standard specifies the apparatus, the reagents and the procedure to be used in conducting
the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray
(CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent or
temporary corrosion protection.
It also describes the method employed to evaluate the corrosivity of the test-cabinet environment.
It does not specify the dimensions of test specimens, the exposure period to be used for a particular product,
or the interpretation of results. Such details are provided in the appropriate product specifications.
The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects in
certain metallic, organic, anodic oxide and conversion coatings.
The neutral salt spray test applies to:
? metals and their alloys;
? metallic coatings (anodic and cathodic);
? conversion coatings;
? anodic oxide coatings;
? organic coatings on metallic materials.
The acetic acid salt spray test is especially useful for testing decorative coatings of
copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic coatings
on aluminum.
The copper-accelerated acetic acid salt spray test is useful for testing decorative coatings of
copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic coatings
on aluminum.
The salt spray methods are all suitable for checking that the comparative quality of a metallic material, with or
without corrosion protection, is maintained. They are not intended to be used for comparative testing, to rank
different materials relative to each other with respect to corrosion resistance.
鹽霧腐蝕試驗箱現貨供應,鹽霧腐蝕試驗箱*,鹽霧腐蝕試驗箱*
品牌 | 巨為 | 型號 | JW-90-BS |
材質 | 進口PVC板 | 溫度范圍 | 35-50(℃) |
測量范圍 | 鹽水噴霧試驗機適用于各種材質之表面處理,包含涂料、電鍍、有機及無機皮膜、陽極處理、防銹油等防腐蝕處理后測試產品這耐蝕性 | 測量對象 | 本機器適用中性試驗及耐腐蝕性試驗 |
工作室尺寸 | 90X60X50(mm) | 重量 | 150(kg) |
一、鹽水噴霧試驗機主要技術參數如下:
機體材質:
1.6mm進口灰白PVC板
2.支物架:直徑10mm鋼化剝離棒耐腐蝕,PVC板V形架。
3.壓力桶采用2.0mmSUS304不銹鋼板無縫焊接
4.加熱采用鈦管,具有耐腐蝕性強和壽命長
5.機器蓋子采用6mm進口壓克力板制作,做工精細,外形美觀,透明度高
二、機器規格:
依據標準 | JW-60-SS | JW-90-BS(ES) | JW-120-NS | JW-160-NS | |
實驗室內箱尺寸 (長X寬X高)cm | 60X45X40 | 90X60X50 | 120X85X50 | 160X85/100X50/60 | |
機器整體尺寸 (長X寬X高)cm | 110X67X118 | 141X91X122 | 200X115X145 | 240X115/135X145/155 | |
實驗室溫度 | NSSACSS35±1/CASS50±1 | ||||
壓力桶溫度 | NSSACSS47±1/CASS63±1 | ||||
鹽水溫度 | 35±1 | ||||
實驗室容積 | 108L | 270L | 510L/600L | 680L/800L | |
鹽水箱容積 | 15L | 25L | 40L | 40L | |
材質厚度 | 5MM | 6MM | 10MM | 10MM | |
噴霧方式 | 連續式或間歇式 | ||||
電源 | AC220V15A | AC220V15A | AC220V30A | AC220V30A | |
供貨周期 | 現貨供應 | 現貨供應 | 現貨供應 | 現貨供應 |
以上規格型號,請客戶選擇!
三、控制系統:
1.DHC溫度控制器,數字顯示PID自動演算,SSR輸出,高穩定性PT-100傳感器,鹽霧試驗時溫度誤差為:±1℃
2.飽和空氣桶采用亨利定律,于以加溫加濕,實驗室溫度濕度達到95%以上,
四、計時系統:采用高精度多功能計時器,試驗時間可設定多功能化,可設定0.01S—9999H.(連續)
五、補水系統:采用自動、手動加水系統,具有水位不足時自動、手動補水功能,實驗不中斷
六、加熱方式:鹽霧實驗時采用蒸汽直接加熱方式,升溫時間快,溫度分布均勻。
七、控制方式:五鍵式標準型操作,帶全偵測故障預警系統。
八、安全保護裝置:防止實驗室及空氣飽和桶內發熱管燒壞。
1.附雙重超溫保護,在出現溫控器故障或加熱系統故障時,可自動切斷加熱電源;
2.雙重低水位保護;
3.附超載短路保護,防止出現異常時損壞儀表及儀器內部電器配件,出現任何一個低水位,機器則停止工作。
九、計量筒:采用內置式霧量收集,不易損壞。
十、噴嘴:精密型石英玻璃噴嘴,保證使用4000個小時不結晶,噴霧塔附錐形分散器,具有導向噴霧,調節噴霧量、計均勻度等功能。
十一、密封方式:內外箱連接密封槽,采用水密封。
十二、控制面板及電器配件:溫度控制器(DHC)2個、壓力表2個(AIRTAC)、指示燈3個、計時器(OMRON)1個、累時器(旭瑞)1個、控制開關1個、固態繼電器SSR(旭瑞)2個、繼電器(歐姆龍)3個,溫度傳感器(神捷)2條、調壓閥2個(AIRTAC)、電磁閥2個、水位器(祥陽)4個,
十三、溫度范圍:
1、實驗室溫度:35℃—55℃(可任意設定)2、飽和空氣桶:47℃—63℃(可任意設定)
十四、升溫度速度:(環境溫度為20℃)
1、實驗室溫度:常溫到35度:約需35分鐘
2、飽和空氣桶溫度:常溫到47度:約需:15分鐘
十五、本機器適用中性試驗及耐腐蝕性試驗、使用標準:CNS3627、3885、4259、7669、8886
JISD-0201、H-8502、H-8610、K-5400、Z-2371、ISO3768、3769、3770、ASTMB-268、GB-T2423、GJB150內置功能:鹽水噴霧試驗機適用于各種材質之表面處理,包含涂料、電鍍、有機及無機皮膜、陽極處理、防銹油等防腐蝕處理后測試產品這耐蝕性。