產品細節:TRICONEX 4119A 增強型智能通信模塊(EICM)

型號4119A增強型智能通信模塊(EICM)允許Tricon與Modbus主站和從站進行通信
1131，還有打印機。
對于Modbus連接，EICM用戶可以選擇RS-232點對點接口作為一個主站和一個從站，或者RS-485接口作為一個主站和最多32個從站。RS-485網絡中繼可以是一根或兩根雙絞線，最長可達4000英尺(1200米)。
每個EICM包含4個串行端口和1個并行端口，可以并發操作。每個串口可以配置為Modbus主機，每個Tricon最多可配置7個Modbus主機
底盤。單個Tricon系統最多支持2個eicm, eicm必須位于一個邏輯槽位。
(EICM不支持熱備功能，但可以在控制器在線時更換故障的EICM。)每個串行端口都是的地址，并支持Modbus或trstation接口。

Modbus通信支持RTU和ASCII兩種模式。并行端口提供Centronics接口到打印機。每個EICM支持57.6千比特/秒的總數據速率(對于所有四個串行端口)。
Tricon的程序使用變量名作為標識符，但Modbus設備使用稱為別名的數字地址。因此，必須為每個將被Modbus設備讀取或?qū)懭氲腡ricon變量名分配別名。別名是一個五位數字，表示Modbus消息類型和Tricon中變量的地址。在trstation 1131中分配了一個別名號碼。
只要為Tricon變量別名，任何標準Modbus設備都可以通過EICM與Tricon通信。當主機通過其他通信模塊(如NCM)訪問Tricon時，也必須使用別名號。有關更多信息，請參閱第61頁的“通信能力"。

The Model 4119A Enhanced Intelligent Communication Module (EICM) allows the Tricon to communicate with Modbus masters and slaves, TriStation
1131, and printers.
For Modbus connections, the EICM user can select the RS-232 point-topoint interface for one master and one slave, or the RS-485 interface for one master and up to 32 slaves. The RS-485 network trunk can be one or two twisted-pair wires up to a maximum of 4,000 feet (1,200 meters).
Each EICM contains four serial ports and one parallel port which can operate concurrently. Each serial port can be configured as a Modbus master with up to seven Modbus masters per Tricon
chassis. A single Tricon system supports a maximum of two EICMs, which must reside in one logical slot.
(The hot-spare feature is not available for the EICM, though you can replace a faulty EICM while the controller is online.) Each serial port is uniquely addressed and supports either the Modbus or TriStation interface.

Modbus communication can be performed in either RTU or ASCII mode. The parallel port provides a Centronics interface to a printer. Each EICM supports an aggregate data rate of 57.6 kilobits per second (for all four serial ports).
Programs for the Tricon use variable names as identifiers but Modbus devices use numeric addresses called aliases. Therefore an alias must be assigned to each Tricon variable name that will be read by or written to a Modbus device. An alias is a five-digit number which represents the Modbus message type and the address of the variable in the Tricon. An alias number is assigned in TriStation 1131.
Any standard Modbus device can communicate with the Tricon through the EICM, provided that aliases are assigned to the Tricon variables. Alias numbers must also be used when host computers access the Tricon through other communication modules, such as the NCM. See “Communication Capabilities" on page 61 for more information.

推薦主營型號:TRICONEX 4119A 增強型智能通信模塊(EICM)