膠帶保持力測試儀（10組） （ Adhesive Tape/Tape Retentivity Test）
膠帶保持力測試儀簡介：
將膠帶粘于試驗板上, 下端懸掛標準荷重,經一段時間后, 測量膠帶下滑距離或膠帶粘著時間用來評定膠帶粘著的持久性。

膠帶保持力測試儀設計標準：CNS-11887、11888、PSTC-7，GB/T 4851

膠帶保持力測試儀技術參數
溫 度: 常溫
試驗治具: 10組
砝 碼: 1KG（或）
計 時 器: 10組,99999.9小時
試驗鋼板: 10片
加載鋼板: 10片
外型尺寸: (L×W×H) 530×250×650 mm
機臺重量: 32kg


膠帶保持力測試儀（10組） （ Adhesive Tape/Tape Retentivity Test）
Test Standard: GB/T4851, CNS11888, PSTC7
Uses: It does some loading tests at adhesive force. Place 1 inch tape onto SUS#304 stainless steel plate and roll it by the standard rolling ball at 300mm/min three times. Hang the steel plate up and add stated weights. The clock will auto-record the time when weights drop down and this represents adhesive force of tape.

Characters:

1. No operator monitor the process as the automatic memory function.

2. It also has elegant structure and easy operation.

Specifications:

Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual