HTHS高溫高剪切潤滑油表觀粘度標油
HTHS高溫高剪切潤滑油動力粘度標油
HTHS高溫高剪切潤滑油動力粘度標油（多重毛細管粘度計法）
符合
ASTM D5481-2010
中文名稱： 用多孔毛細管粘度計在高溫高剪切率下測量表面粘性的標準試驗方法
英文名稱：Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
儀器配套測試用標準物：（美國進口標油，帶檢定證書）
牛頓型油或流體：在150℃時有確定的粘度值。
| 訂購編號 | 標準物名稱 | 動力粘度標稱 mPa.s (cP) | |
| | | ||
| 9727-U45 | HT22 | 3.5 | 1.5 |
| 9727-U50 | HT39 | 4.7 | 2.0 |
| 9727-U55 | HT75 | 7.0 | 2.7 |
| 9727-U60 | HT150 | 10.5 | 3.7 |
| 9727-U65 | HT240 | 15.4 | 5.0 |
| 9727-U70 | HT390 | 23.5 | 7.0 |
| 9727-U92 | HTNN-1 | — | 3.6* |
| 9727-U94 | HTNN-2 | — | 3.1* |
ASTM D5481 – 13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer 用多重毛細管粘度計在高溫高剪切率下測量表觀粘度的標準試驗方法
SHT 0703-2001 潤滑油在高溫高剪切速率條件下表觀粘度測定法(多重毛細管粘度計法)
HTHS高溫高剪切潤滑油表觀粘度標油測試單位(mPa?s or cP)
HTHS高溫高剪切潤滑油動力粘度標油測試單位(mPa?s or cP)
原廠標油，帶檢定證書
Table 5 ? Nominal Viscosity Values of High-Temperature Viscosity Standards
|
Catalog Number |
Viscosity Standard | Dynamic Viscosity in mPa.s (cP) | |
| 100 °C | 150°C | ||
| 9727-U45 | HT22 | 3.5 | 1.5 |
| 9727-U50 | HT39 | 4.7 | 2.0 |
| 9727-U55 | HT75 | 7.0 | 2.7 |
| 9727-U60 | HT150 | 10.5 | 3.7 |
| 9727-U65 | HT240 | 15.4 | 5.0 |
| 9727-U70 | HT390 | 23.5 | 7.0 |
| 9727-U92 | HTNN-1 | — | 3.6* |
| 9727-U94 | HTNN-2 | — | 3.1* |
* Non-Newtonian standard. Data at 106s-1
所有評論僅代表網友意見，與本站立場無關。