Fluke 6054/6055/7007系列 高穩定的深井計量校準恒溫槽
Extra-deep wells for thermometry work requiring extra tank depth and ultimate stability
Fluke 6054、6055、7007型號恒溫槽提供超深井，可進行需要額外水箱深度和穩定性的溫度測量工作。
·Constant liquid levels through concentric-tube design
·Special design for sighting LIG thermometers
·Depth up to 60cm (24 in) 深度高達60厘米
·Optional interface packages control all settings
The models Fluke 6054, 6055 and 7007 have extra-deep wells for use with liquid-in-glass thermometers, SPRT calibrations, or other thermometry work requiring extra tank depth. They were originally designed for NIST.
Well depths vary from 17 to 24 inches to eliminate stem conduction effects in probes that require more than 12 inches of immersion. Originally developed for a national standards lab, these baths are optimized for the visual calibration of liquid-in-glass thermometers.
The Fluke 7007 is designed for the temperature range of –5°C to 110°C, has built-in refrigeration, is 24 inches deep, and comes with a removable polycarbonate cover.
The Fluke 6054 covers the temperature range of 50°C to 300°C, is also 24 inches deep, and comes with a removable stainless steel cover.
The Fluke 6055 is engineered for the temperature range of 200°C to 550°C with salt and is 17 inches deep. Specific size differences and various specifications are shown in the comparison table.
The Model 6055, operating up to 550°C, uses molten salts with a pumping system for maintaining the necessary consistent fluid level required for liquid-in-glass thermometer calibrations. A viewing channel is built into the top cover for a clear visual path to your glass thermometers.
The Fluke 6055 also has an optional thermometer carousel for holding several glass thermometers in the correct calibration position without exposing them to the hot salts in the bath. The Model 2018 Carousel is completely constructed of stainless steel and has an elevated handle for rotating your thermometers to the viewing position.
These deep-well baths are built to the same performance standards as all Fluke Calibration baths, which means you can’t find another bath that has better stability or uniformity.
技術指標
Fluke 7007 | Fluke 6054 | Fluke 6055 | |
溫度范圍 | –5°C～110°C | 50°C～300°C | 200°C～550°C |
溫度穩定性 | ±0.001°C at 0°C (水/乙醇) | ±0.003°C at 100°C (油5012) | ±0.003°C at 200°C (鹽) |
溫度均勻性 | ±0.004°C at 0°C (乙醇) | ±0.007°C at 100°C (油5012) | ±0.005°C at 200°C (鹽) |
溫度設定 | 帶按鈕數據輸入的數字顯示器 | ||
設定點分辨率 | 0.002°C, high res. 0.00003°C | 0.01°C, high res. 0.00018°C | |
顯示溫度分辨率 | 0.01°C | ||
數字設定精度 | ±1°C | ||
數字設定重復性 | ±0.005°C | ±0.01°C | |
加熱器 | 250～1000 W | 250～1000 W | 260～2080 W |
工作區域 | 178mm 直徑 | 196mm直徑 | 107mm直徑 |
深度 | |||
槽體 | 304不銹鋼 | ||
供電電源 | 230Vac (±10%), 50/60Hz,15A | 230Vac (±10%),50/60Hz,15A | 230Vac (±10%),50/60Hz,15A |
容量 | 42升 | 50升 | 19.8升(5.2gal,43kg [95lb] of bath鹽) |
尺寸 (DxWxH) | 470x775x194mm至工作面，1397mm至攪拌電機頂部，914mm至控制面板 | 572x762x1219mm至工作面，1422mm至攪拌電機箱頂部，914mm至控制面板 | 572x775x1219mm至工作面，1524mm至攪拌電機箱頂部，914mm至控制面板 |
從視線到液體頂部的距離 | 9.5mm | 15.9mm | |
自動化 | Use the 1586A Super-DAQ to automate temperature sensor calibration. For IEEE-488, add the 2001-IEEE to the automation package. | ||
重量 | 70.8kg | ||
型號和配件
型號 | 描述 |
Fluke 6054 | 中溫深井恒溫槽 |
Fluke 6055 | 高溫深井恒溫槽 |
Fluke 7007 | 低溫深井恒溫槽 |
配件 | 描述 |
恒溫槽介質 | 整套恒溫槽介質 |
2018 | 6055 用轉盤式夾具 |
2069 | 8倍望遠鏡，帶安裝件 |
所有評論僅代表網友意見，與本站立場無關。