Dedicated readout meter or SWT range of tensiometers.
The SWT-MR (Infield7) Manual Readout Unit takes and stores spot readings of soil water tension (potential), soil temperature and filling status. It is suitable for use with all SWT Tensiometers. The SWT-MR has an automatic offset correction for water column height aninstallation angle. The unit has memory for 250 readings and comes with a small carrying case.
If continuous monitoring is required rather than spot readings, the GP2,GP1 and DL2e data loggers are all compatible with SWT Tensiometers.
Water tension accuracy | ±100 kPa… -100kPa |
Voltage signal | 0 … 2000 mV |
Accuracy | 0.2 mV |
Memory | 250 readings |
Batteries | 4x AA 1.5 V |
Housing | IP65 splash water protected |
Size | 17 x 9 x 3 cm |
Connector | 4- and 8-pin plug M12 |
Comes in a case with a set of batteries | |
所有評(píng)論僅代表網(wǎng)友意見，與本站立場(chǎng)無關(guān)。