熱參數是衡量 LED性能的關鍵指標。LED在不同溫度條件下工作，對于LED的光參數、色參數、電參數、壽命等其它參數都有重大影響。因此，對于LED生產廠家、應用廠家，如何對LED進行合理的散熱設計是至關重要的。JDS200參照相關標準，對LED的光、色、電、熱進行綜合測試，并描繪各參數隨時間的變化曲線，使設計人員的工作變得輕輕松松。
Thermal parameter is the key index to evaluate the quality of LED. Different temperature will have significant different effects on optical parameters, color parameters, electricity parameters and life of LED.Therefore,design and control of the thermal dissipation are the most important  thing for the manufacturers and users, referring to the relative international standard,JDS200 could conduct integration testing on optic,color,electricity and thermal,meanwhile record the changing curve of the parameters with time.

技術特性 Characteristics & Specifications

◆ 測量參數 Measure parameters：
  ○熱學參數 Thermal parameters: 結溫、熱阻、K系數 Junction temperature,thermal resistance and  K factor
  ○光色參數 Optical parameters：光譜功率分布、色品坐標、相關色溫、峰值波長、主波長、半寬度、 紅色比顯色指數、光功率
    Spectral power distribution,chromaticity coordinate,correlative color temperature,peak wavelength,dominant
    wavelength,semibreadth,red ratio,rendering index,luminous flux and optical  power
  ○電學參數 Electrical parameters：正向電壓、正向電流 Forward voltage（VF）and Forward current（lF）
◆ 波長測量范圍  Wavelength measurement range：380~780nm 
    熱沉控制范圍 Thermal sink range：5°C~90°C
◆ 波長準確度 Wavelength preciseness: ±0.5nm
    色品坐標準確度 Chromaticity coordinate accuracy: ±0.001（標準A光源下）
    （Under standard illuminator A）
◆ 溫控系統(tǒng)顯示精度：0.25%，結溫測量準確度：±1οC
    Temperature control system display accuracy:0.25%，junction temperature accuracy:±1°C
◆ 描繪各參數隨時間的變化曲線 Record the changing curve of parameters with time
◆ 程控設定熱沉溫度、LED正向電流等參數，以模擬不同LED的實際工作狀態(tài)
    Programmable set thermal sink temperature, and If of LED for the purpose of imitating different working situation of LED
◆ 測試條件符合相關標準
   Test condition complies with corresponding international standard