高功率溫度控制器，±14 A，24 VDC，336 W 返回列表頁

高功率溫度控制器，±14 A，24 VDC，336 W

概覽

The 3700 TEC Controller provides a 336 W bipolar output for operation with thermoelectric (TE) coolers and replaces legacy Model 3150. At the unit's heart, DSP based controls allow for PID settings with fast settling times. This feature combined with sound electronics design and quality components results in great temperature stability and higher reliability.

Protection features include: ITE Limit, Hi and Lo Temperature Limits, Voltage Limits, Sensor Open and TE Open Detection. To prevent noise pickup, either by the output lines or the sensor inputs, shielded cables are also available.
All standard temperature sensors including thermistors, platinum RTD, AD590/592 and LM335 IC sensors are supported without an additional interface needed. Sensor calibration constants are easily programmed for direct readout in °C.

Computer interface is possible via a USB terminal. LabVIEW drivers are included with the computer interface as a standard feature.

高功率溫度控制器，±14 A，24 VDC，336 W?技術參數

TE 電流范圍-14.00 to +14.00 A

TE 電壓范圍-24 to + 24 V

TE 輸出功率336 W

溫度范圍-100 to 250°C

TE 電流精度± 0.3%

TE 限制電流精度± 0.3 % FS

TEC 噪聲/紋波<1 mA

TEC 輸出 1 小時穩定性0.0009°C

TEC 輸出 24 小時穩定性0.0019°C

端口類型7-pin, female D-Sub 7W2

計算機接口USB

顯示類型4-line by 20 character alphanumerical, and seven segment display

顯示器電阻范圍 (10 µA)0.01 to 250.00 kΩ

顯示器電阻范圍 (100 µA)0.001 to 25.000 kΩ

工作溫度0 to 40°C

電源要求100-240 VAC, 50/60 Hz universal input