其他離體器官灌注系統 返回列表頁

IPL&K其他離體器官灌注系統的概述

hse—ha生理學系統是一系列應用廣泛的完備產品，可用于整體動物生理學、立體或在體器官和組織灌注及組織浴槽研究。這些系統具有廣泛的應用，包括傳統的安全藥理學、dmpk、毒理學、呼吸系統、心臟病學、分子生物學和生理學。每個系統都設計了標準的組件，再加一些其他配置以適合特殊研究的需要。。標注組件也意味著如果你是需要將現有設備淦耄蛘囈邢低成?，或者是完整祬蠕套产屏P愣賈恍枰郝蛐枰墓辜?/span>hse-ha生理學系統為你提供各種工具，使你的研究走向多產和成功。

我們提供大多數生理學檢測設備，包括放大器、電極、傳感器和電化學檢測器。參數包括力、位移、壓力、液體和氣體流、心電圖（單導聯—12導統）、map（單個或多個部位）、腦電圖、*、連續支流灌注傳統的血?dú)鈪?shù)和電解質的分析，可以選擇程序化軟件和傳統的刺激器作為放大器、電極和傳感器等產品的補充。

hse-daq系統產品家族（bdas、acad、haemodyn、isoheart、pulmodyn、pennock）可以記錄你的初始信號，計算到處的參數，注釋數據，快速簡易的輸入確定的數據用于分析。同時還可以選擇用于進一步分析的軟件模塊，帶狀記錄紙打印，自動和控制模塊等。產品經過預先設置，打開包裝即可使用，并專門設計符合你的系統配置和數據分析要求。

• for use in physiological or pharmacological research for the perfusion of a pig liver or kidney with blood or erythrocyte containing perfusate

basic system

the pig liver to be perfused is placed in a moist, thermostated chamber and perfused with blood through the portal vein under constant-flow conditions. a centrifugal pump with a gentle action on blood is employed to reduce hemolysis; it is controlled by an electronic controller （scp） so that the apparatus can be operated under constant-flow conditions. the system can also operate under constant-pressure conditions. flow control requires that the flow is measured by means of a flow probe （16n） and a flowmeter （ttfm）.

the pressure should also be measured to monitor the experiment. this requires a pressure transducer （p75） and a bridge amplifier （tam）. a suitable oxygenator is employed for oxygenating and warming the blood; it can be of a type used in human medicine, e.g. terumo capiox sx10®.

components required

the following items are required for operating the apparatus:

• thermostated moist chamber type 869/2

• circulating thermostat of approx. 3 liter capacity, distilled water and an anti-algal agent, e.g. thermoklar

• pump with electrical control. for blood we recommend a pump drive bvp-zx with centrifugal pump head, see the pump section a

• servo controller for perfusion （scp） type 704, see page k12

• flowmeter （ttfm） with flow probe （16n）, see pages j6 and j7

• recommended: pressure transducer （p75）, see page j3 and bridge amplifier （tam-d）, section i of this catalog

• oxygenator with heat exchanger, e.g. terumo capiox sx10®

• source of carbogen for aeration. central supply or carbogen cylinder with pressure reducing valve

additional monitoring equipment can be added to the system as required to cr-eate a custom, application specific, turn key system for your unique research needs.