亚洲欧洲另类图片综合专区,全亚洲免费一级黄片

日本CITIZEN西鐵城變位感應器 IPD-SC1RC 超小型顯示器返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號IPD-SC1RC

品牌

廠商性質代理商

所在地深圳市

在線詢價 加入對比查看聯系電話

更新時間：2022-05-29 10:10:03瀏覽次數：42次

聯系我時，請告知來自興旺寶

FEATURE
High-speed storage of up to 2,048 data in 1 msec.
Each counter can store up to 2,048 measured data in its internal memory. The data can be stored in 1 msec cycles. Since the data can be output through RS232C after storage, IPD-SC1R can be utilized for shape measurement.
Measured values from a number of counters are stored synchronously
Sampling commands from external systems can be synchronized between counters with hardware, and can be stored simultaneously. Alternatively, the counters can be divided into a number of groups and each group can be controlled with a different timing..
Operations can be performed freely on the measured values from several counters.
On the base unit, the measured values from multiple detectors can be calculated, displayed and output. For example, the average of the values measured by 3 counters, or the sum of the values measured by 16 counters can be obtained. By selecting the calculation method, "Max - Min" of multiple measured value can be obtained. It is also possible to set constants for calculations of detector measurement values.
Designed to meet the EMC Directive and the RoHS Directive.

Specifications

Model	IPD-SC1RP (Base Unit)	IPD-SC1RC (Sub-Unit)
Power supply	DC12-24V±10% Ripple (P-P) 10% or less
Power usage	200mA or less (when detector set connected)
Display	Polarity and 6 digits, mode, green/red backlight LCD
Resolution	0.1/1/10μm (selectable)
Display range	-99.9999?+99.9999mm
Quantization error	±1digit
Response speed	2000mm/sec. (when 0.5μm resolution detector set used)
Number of detector inputs	1ch
Maximum sets installed	16 sets (1 base unit + 15 sub-unit)
Reset method	Reset at any optional point by the front switch, external signal or RS command.
Preset function	6 digits and polarity
Data hold method	Hold of display and data by external signal
Peak measurement	+P, -P, P-P, (P-P)/2 (+P: Maximum, -P: Minimum)
Measuring direction	+/- (Can be switched depending on the setting)
Error functionality	Equipped
Fault detection	-NG/OK/+NG
Measurement condition registered	Seven items (key, RS command)
Computation functionality	+/-/Χ/average
RS-232C	Equipped	Not equipped
Measurement value storage	2048 data items
Input	Reset, storage commands, data hold, peak clear