SGM 1400度高溫箱式爐是由洛陽西格馬高溫電爐生產的高溫箱式電阻爐,這款1400度高溫爐的爐體采用矩形結構設計,以U型硅碳棒為加熱元件,采用雙層殼體結構和30段程序控溫系統,移相觸發、可控硅控制,爐膛采用化鋁多晶纖維材料(氧化鋁含量 95%以上),雙層爐殼間配有風冷系統,能快速升降溫,該爐具有溫場均衡、表面溫度低、升降溫速率快、節能等 優點。
SGM 1400 ℃ high temperature box furnace is a high temperature box type resistance furnace produced by Luoyang sigma high temperature electric furnace, The furnace body of this 1400 ℃ high temperature furnace is designed with rectangular structure, U-shaped silicon carbide rod as heating element, double shell structure and 30 section temperature control system, phase-shifting trigger and silicon controlled control. The furnace is made of aluminized polycrystalline fiber (alumina content) The furnace has the advantages of balanced temperature field, low surface temperature, fast temperature rise and fall, energy saving and so on.
1400度高溫箱式爐是高校、科研院所、工礦企業做粉末燒結、陶瓷燒結、高溫實驗、質量檢測用的燒結設備。
1400度高溫電阻爐主要規格參數:
電爐型號 | SGM B1400-I | SGM B1400-II | SGM B1400-III | SGM B1400-Ⅳ | SGM B1400-Ⅴ | SGM B1400-Ⅴ | |
功率 | 3 KW | 5 KW | 7KW | 9 KW | 12KW | 18KW | |
爐膛尺寸(DXWXH) | 160X150X150mm | 200X200X200mm | 300X200X200mm | 300X250X250mm | 400X300X300mm | 500X400X400mm | |
外形尺寸(mm) | 520X490X880 | 564X530X930 | 600X630X970 | 620X630X1020 | 670X760X1110 | 840X870X1740 | |
電源電壓 | 220V | 220V | 220V | 380V | 380V | 380V | |
相數 | 單相 | 三相 | |||||
加熱元件 | U型硅碳棒 | ||||||
熱電偶型號 | S | ||||||
升溫速率 | ≤20℃/min | ||||||
額定溫度 (℃ ) | 1350 | ||||||
額定溫度 (℃ ) | 1400 | ||||||
控溫精度 | &±1℃ | ||||||
溫度波動度 | &±1℃ | ||||||
升溫速率 | ≤30 ℃/ Min | ||||||
推薦升溫速率 | 15℃/ Min | ||||||
爐膛材料 | 1600型氧化鋁多晶體纖維 可選購日本進口爐膛材料(選擇進口爐膛材料時需另外付費) | ||||||
控制精度 | +/- 1 ℃ | ||||||
額定溫度 | 1400 ℃ | ||||||
額定溫度 | 1350 ℃ | ||||||
四周表面溫度 | ≤35 ℃ | ||||||
熱電偶型號 | S | ||||||
觸發器 | 移相觸發 | ||||||
電器 | 浙江正泰 | ||||||
可控硅 | 106/16E 德國西門康 | ||||||
行程開關 | 該爐門上安裝有行程開關,打開爐門時,電源會自動切斷,防止碰到加熱元件而出現觸電危險。
|
1400度高溫馬弗爐組件配置:
1400 ℃ muffle furnace component configuration:
1400度高溫爐控溫儀表: 采用宇電程序控溫儀表
Temperature control instrument of 1400 ℃ high temperature furnace: Yudian program temperature control instrument is adopted
1、30段程序控溫智能PID調節。
30 segment program temperature control intelligent PID regulation.
2、具有過溫保護、斷偶保護,過溫或斷偶時電爐加熱電路會自動切斷,(當電爐溫度超過1620度或熱電偶燒斷時,主電路上的交流繼電器會自動斷開,主電路斷開,面板上ON燈熄滅,OFF燈亮,有限的保護電爐)。
The heating circuit of electric furnace will be cut off automatically in case of over temperature or disconnection. (when the temperature of electric furnace exceeds 1620 ℃ or the thermocouple is burnt out, the AC relay on the main circuit will be automatically disconnected, the main circuit will be disconnected, and the on light on the panel will be off,
Off light is on, limited protection of electric furnace).
3、帶有485 通訊接口(選購軟件時標配)
With 485 communication interface (standard configuration when purchasing software)
4、具有斷電保護功能,即斷電后再給電啟動爐子時、程序不是從起始溫度開始升、而是從斷電時爐溫開始升。
It has the function of power-off protection, that is, when starting the furnace after power-off, the program does not start from the initial temperature, but starts to rise when the power is off.
5、儀表具有溫度自整定的功能
The instrument has the function of temperature self-tuning
1400度高溫馬弗爐開門保護系統:
Door opening protection system of 1400 ℃ muffle furnace:
該爐安裝有行程開關,當爐蓋打開時會自動切斷電源,有效地保證使用者的安全。
The furnace is equipped with a travel switch, when the furnace cover is opened, the power supply will be automatically cut off, effectively ensuring the safety of users.
1400度高溫實驗爐膛材料:
High temperature furnace material: 1400
采用日本三菱氧化鋁纖維爐膛材料,不掉粉、材料保溫性能好、反射率高、溫場均衡,抗熱漲冷縮能力強。
Using Mitsubishi alumina fiber furnace material from Japan, it has no powder dropping, good heat preservation performance, high reflectivity, balanced temperature field and strong resistance to thermal expansion and cold contraction.
1400度高溫爐加熱元件:
Heating elements of 1400 ℃ high temperature furnace:
采用硅碳棒,棒的表面負荷低,使用壽命長。
The silicon carbide rod has low surface load and long service life.
漏電保護功能:
Leakage protection function:
該爐裝了漏電空氣開關,當爐體漏電或電流超過額定電流時空開會自動關閉以切斷電源。
The furnace is equipped with leakage air switch. When the furnace leakage or current exceeds the rated current, the meeting will automatically shut down to cut off the power supply.
1400度硅碳棒馬弗爐軟件控制系統(選購):該爐配有通訊接口和軟件,可以直接通過電腦控制爐子的各個參數,并能從電腦上觀察到爐子上PV和SV溫度值和儀表的運行情況,爐子的實際升溫曲線電腦會實時繪出,并能把每個時刻的溫度數據保存起來,隨時可以調出。
Software control system of 1400 degree silicon carbide muffle furnace (optional): the furnace is equipped with communication interface and software, which can directly control various parameters of the furnace through computer, and observe the PV and SV temperature values on the furnace and the operation of the instrument from the computer. The actual temperature rise curve of the furnace will be drawn by the computer in real time, and the temperature data of each moment can be saved and can be called out at any time.
1400度硅碳棒馬弗爐控制系統:
Control system of 1400 degree silicon carbide muffle furnace:
1、電器:正泰,
Electrical appliances: Chint,
2、可控硅:德國西門康106/16E,
SCR: Siemens 106 / 16e,
3 觸發器:移相觸發。
trigger: phase-shifting trigger.
箱式爐廠家哪個好?洛陽西格馬高溫電爐可生產箱式電阻爐、箱式高溫爐、高溫箱式電阻爐、高溫箱式爐、箱式高溫電阻爐、箱式氣氛爐、氣氛箱式爐、箱式加熱爐、箱式熱處理爐、熱處理箱式爐、箱式實驗爐、實驗箱式爐。
需要了解箱式爐價格、箱式爐型號、箱式爐使用方法,可聯系箱式爐廠家洛陽西格馬高溫電爐。箱式爐說明書
哪個廠家的質量好?生產廠家西格馬質量好,售后完善。
所有評論僅代表網友意見,與本站立場無關。