日本SMC閥島傳送系統 

注1）這是一個規范來傳輸?shù)拈y電源和輸入塊保險絲熔斷的電壓降的診斷信息作為輸入數據提供給
高手。 EX250-SDN1成為I / O連接超時檢測診斷信息的時候，而不是EX250-SDN1-X102。
由于這是一種特殊的產品，未的歧管部件數。請咨詢SMC為集成塊集成式。
注2）請注意，版本是可能會改變。
注3）每個文件可以從SMC上下載

日本SMC閥島傳送系統 

注4）由于EX250-SAS7 / 9與1的供電系統兼容，為單元的電源被分成兩個：電源，用于傳感器和閥門。
注5）由于EX250-SAS7 / 9與1的供電系統兼容，電源必須根據下面的值來劃分。 （參閱
2077的細節。）
（EX250-SAS7 ...zui大240毫安，EX250-SAS9 ...zui大120 mA）的
注6）當SI單元安裝到歧管的時候發貨，配件都與它一起運來。
注7）有關詳細規格上述以外，指的是可以從SMC上下載的操作手冊Note 1) This is a specification to transmit the diagnostic information of voltage drop of the valve power supply and input block fuse blowout as an input data to the
master. EX250-SDN1 becomes I/O connection time out when the diagnostic information is detected, but not EX250-SDN1-X102.
Since this is a special product, a manifold part number is not specified. Please consult SMC for the manifold integrated type.
Note 2) Please note that the version is subject to change.
Note 3) Each file can be downloaded from SMC website

Note 4) Since EX250-SAS7/9 is compatible with the 1 power supply system, the power supply for units is divided into two: the power supply for sensors and for valves.
Note 5) Since EX250-SAS7/9 is compatible with the 1 power supply system, the power supply must be divided in accordance with the values below. (Refer to page
2077 for details.)
(EX250-SAS7 ··· Max. 240 mA, EX250-SAS9 ··· Max. 120 mA)
Note 6) When the SI unit is mounted to the manifold when shipped, accessories are shipped together with it.
Note 7) For detailed specifications other than the above, refer to the operation manual that can be downloaded from SMC website