Skylink斯凱力3寸不銹鋼特氟龍隔膜泵SK80/3XAA/NTTT/0B0隔膜泵安裝注意事項

3寸不銹鋼特氟龍隔膜泵SK80/3XAA/NTTT/0B0

進氣接口：3/4"(BSPT)

泵殼材質：316

隔膜材質：Teflon

球閥材質：Teflon

流量：988L/min

出口壓力：8.6Bar

Skylink斯凱力氣動隔膜泵，選型咨詢報價，詳情咨詢，。

SKYLINK AODD pumps are able to fulfill different requirements of most demanding fluid transfer, they are designed as well as manufactured in such high quality, in order to satisfy our clients’ various demands. SKYLINK provides diaphragms which are made of different elastomeric materials to be suitable for different environments according to clients ‘requirements.

斯凱力氣動隔膜泵高超的設計和制造品質，能夠滿足客戶不同需求以及苛刻條件的流體輸送。斯凱力可根據客戶的要求提供不同彈性材料制成的隔膜，以適用于不同的環境。

Piping管道:

The pipes which are connected to the inlet and outlet must be incompressible material, so that those pipes are able to bear a high vacuum. All piping should be equivalent size or larger than the diameter of the inlet and outlet, which will improve pump’s performance.

連接到入口和出口的管道必須是不可壓縮的材料，以便那些管道能夠承受高真空。所有管道的尺寸應大于或等于進口和出口的直徑，這將提高泵的性能。

Installation安裝:

Engineer and installation personnel shall propose an integrated installation plan, which will make pumps perform better, meet fluid transfer requirement and easier to maintain in the future.工程師和安裝人員應提供一體化的安裝計劃，以滿足流體輸送要求，而且將來更方便維護。

Location位置:

When install pumps, enough space shall be left for maintenance personnel to do maintenance or even rebuild your system, such as add a pressure gauge or a valve on the pump in the future. 安裝泵時，維修人員應留有足夠的空間進行維修或重建系統，如將來在泵上加裝壓力表或閥門。

Air supply供氣:

Each pump must have a sufficient air supply to meet pump’s air demand, if air supply is not powerful enough, the pump will not reach its best performance. Use air pressure up to 8.6 bar (125Psig) according to different pumps.In addition, proper air filter and regulator are also important for pump to its p erformance, so SKYLINK recommends that a 5μ(micron)air filter shall be applied before pump’s air inlet.

每臺泵都必須有足夠的空氣供應以滿足泵的空氣需求。如果空氣供應不足，泵將無法達到性能。根據不同的泵，使用空氣壓力可達8.6巴（125Psig）。此外，適當?shù)目諝膺^(guò)濾調壓閥對于泵的性能也是重要的，因此斯凱力建議泵進氣口前應使用5μm（微米）空氣過濾器。

Solenoid control電磁閥控制

If air supply of pump is controlled by solenoid valve, a three-way valve shall be applied in order to release the air which is stuck between the pump and valve.

如果用電磁閥控制泵的供氣，則應采用三通閥，以釋放泵和閥之間的空氣。