MICRO IV

: MICRO IV

: MICRO IV with holster

With memory and infrared interface

Single-gas detector with data-logger
The Micro IV single-gas detector is the successor to the proven Micro III. The key features of the Micro III are retained – smart, interchangeable sensor technology, low cost of ownership where 1 x AA battery lasts for up to 6 months in continuous use – but extra functionality is now added.

The Micro IV contains an integrated data-logger which records and time-stamps all events. This stored data can be transmitted to a PC via either the DI220 data interface station or DS220 docking station. Three alarm levels are available (most competing instruments only offer two) in addition to STEL and TWA alarms.
The Micro IV has a very loud (95dB) sounder and high-visibility red LED alarms. Vibration alarm is also available as an option. A large display ensures that gas concentrations can be quickly and easily read by the user.

Gases available:
O₂, H₂S, CO, NO, NH₃, HCN, HCl, SO₂, H₂, C₂H₄O, SiH₄, PH₃, THT, HF, COCl₂, NO₂, Cl₂, O₃, ClO₂

Additional functionality of the MICRO IV

Data-logging
Infrared interface for data communication to Dockingstations
Continuous storage of data without PC
Continuous display of gas concentration
Up to 6 months continuous operation with only one AA battery
Simple bump check and calibration via the Dockingstation (option)

Carrying possibilities (option)
The Micro IV is compact, light and can be securely fastened to the user’s clothing with a durable crocodile clip. A belt clip is also available. An optional rubber boot is also available to give the instrument further protection in arduous work environments.

Attachable motorised pump (accessories)
Inaccessible areas, like tanks and containers, can contain deadly gas mixtures. With the Micro IV, and attachable high-performance pump is available that can sample the gas from up to 30 metres away.

The pump and tube is quick and easy to attach, and has its’ own power supply which means the run time of the Micro IV instrument is not compromised. The separate AA battery pack gives 8 hours of continuous pump operation.

Dockingstation DS220

The innovative Dockingstation DS220 is a complete device management system, that offers the user reduced cost and time for performing functional tests (Bump tests), calibration and documentation. The DS200 is compact, portable and does not require a PC to operate.

When inserted into the DS200, the detector is automatically bump checked. Alarm functions are tested to ensure correct operation, in addition to sensor response. Calibration reports can be printed out from the DS200 (via PC).

All data is recorded on a memory card, and the data transferred from the detector to the DS200 via IR link. The data can then be transferred to PC via a USB cable and manipulated directly in Excel.

The DS200 uses simple traffic light indicators for the user to give the detector status – green is go, red is stop. The DS220 ensures that your detectors are always ready to go, in a safe condition and at a minimum cost.

Red Test failed
Yellow Test in process
Green Test successfully completed and detector ready for use!

Data Interface station DI220

Die MICRO IV Data Interface DI220 is a simple device management system providing fast configuration and simple data download. Stored data can then be transferred from the instrument to PC via a USB cable and manipulated directly in Excel.

top print