PS41 系列壓力開關
經濟的小型壓力開關
特性...
- 3.5到100psi (0.24到7bar
概述/設計原則:
PS41系列小型壓力開關設計用于空間和/或價格敏感的苛刻場合。采用活塞/隔膜設計，集活塞技術的耐高壓和隔膜的靈敏度于一身。采用內六角頭螺絲，即可實現現場調節，又可防止人為誤動.
| 性能參數: | ||
| Wett接液部件 | Diaphragm: Nitrile Standard (Optional Viton®, Neoprene, or EPDM) | |
| 工作溫度 | 見下表 | |
| 開關 | 見下表 | |
| 重復性 | 見下表 | |
| 電氣連接 | DIN 43650A IP65; Terminals IP00; Conduit with Flying Leads IP65 | |
| 耐壓 | 350 psi (24 bar) | |
| 破裂壓 | 700 psi (48 bar) | |
| 認證 | CE, UL Approved units available | |
| 重量，近似值 | 0.3 lbs. (0.14 kg) Brass | |
| 工作溫度表* | |||
| Diaphragm Material | No option -10A, -SP, or -RD | Option -RD or -RD and -G | Option -SP or -10A |
| Nitrile | 15°F to 185°F (-10°C to 85°C) | 15°F to 250°F (-10°C to 121°C) | 15°F to 212°F (-10°C to 100°C) |
| Viton® | 0°F to 185°F (-18°C to 85°C) | 0°F to 250°F (-18°C to 121°C) | 0°F to 121°F (-18°C to 100°C) |
| EPDM | -10°F to 185°F (-23°C to 85°C) | -10°F to 250°F (-23°C to 121°C) | -10°F to 212°F (-23°C to 100°C) |
| Neoprene | -10°F to 185°F (-23°C to 85°C) | -10°F to 250°F (-23°C to 121°C) | -10°F to 212°F (-23°C to 100°C) |
* Switches may function below the cold temperature limit but the setpoints and deadbａnd will increase. Consult factory for details.
| 電氣開關 | |||
| Electrical Switch Ratings | AC | DC | |
| No option or -RD | 5 amps @ 125/250 Volts | 5 amps resistive, 3 amps inductive @ 28 Volts | |
| -G or -RD with -G | 1 amp @ 125 Volts | 1 amp resistive, 0.5 amp inductive @ 28 Volts | |
| -SP without -G | 10.1 amp@ 125/250 Volts | ||
| -SP with -G | 2 amp @ 125/250 Volts | ||
| 重復性 / 死區 | |||
| Pressure Range Code | Pressure Range | Repeatability | Average Deadband* |
| 10 | 3.5 - 8 psi (0.24 bar - 0.55 bar) | ± 0.35 psi (0.024 bar) + 2% of setting | 1.50 psi (0.14 bar) + 7% of setting |
| 20 | 7 - 30 psi ( 0.48 bar - 2.07 bar) | ± 0.8 psi (0.055 bar) + 2% of setting | 3 psi (0.21 bar) + 8% of setting |
| 30 | 25 - 100 psi (1.7 - 6.9 bar) | ± 2.0 psi (0.138 bar) + 2% of setting | 5 psig (0.28 bar) + 10% of setting |
* These numbers are for the standard microswitch. With either the -SP or 10A option, the values are typically 20% greater than those listed. With the -RD option, the values will be typically 25% less than those listed. In certain applications, deadbａnd can be tailored and controlled to customer specifications. Consult factory for details.
所有評論僅代表網友意見，與本站立場無關。