“鑫源”牌全自動鐵粉壓塊機壓制后的鐵粉直接裝罐，燒制成海綿鐵，與傳統手工裝罐相比具有產量高，還原速度快，節約能源，延長耐的使用壽命等特點。
鐵粉壓塊機本機采用進口PLC全自動控制，科技含量高，大大降低了工人的勞動強度，從而提高了產品的產量和質量。
鐵粉壓塊機本機為四柱式壓力機，采用優化的液壓傳動方案，具有強大的動力，準確的定位和完善的動作組合。本機故障率低，發熱量小，生產率高，節電耐用。
After the machine after the iron powder to suppress the direct canning, firing into the sponge iron, and traditional hand-canning high yield compared to restore the speed, energy conservation, to extend the life of fire-resistant cans and so on.
This machine adopts imported PLC automatic control, high technology, greatly reduced the labor intensity, thereby increasing the product yield and quality.
The machine for the Four-column press, using optimized hydraulic drive program, with a strong driving force, accurate positioning and a perfect combination of actions. The machine failure rate is low, heat a small, high productivity, energy-saving and durable.
| 技術參數（Technique parameter） | |||||
| 機型 |
| XY32-300-4 | XY32-400-6 | XY32-500-8 | |
| 項目(item) | 單位(units) | 數值(number) | |||
| 公稱壓力(Nominal pressure) | KN | 3000 | 4000 | 5000 | |
| 使用壓力(Working pressure) | Mpa | 10-25 | 10-25 | 10-25 | |
| 大行程(Maximum stroke) | mm | 400 | 400 | 400 | |
| 大開口高度(Maximum opening height) | mm | 970 | 970 | 970 | |
| 工作尺寸(Working Dimensions) | 左右(Left and right) | 850 |
| 850 |
|
| 前后(Front and back) | mm |
| 900 |
| |
| 成品尺寸 (Final dimension) | mm | D160/d70×180-200 | D160/d70×180-200 | D160/d70×180-200 | |
| 工作速度 (Working speed) | 次/min | 2-3次（12-18塊） | 2-3次（12-18塊） | 2-3次（12-18塊） | |
| 裝機容量 (Installed capacity) | Kw | 22 | 30 | 37 | |
| 外形尺寸 (Outline dimension) | mm |
| 3600×5700×3800 |
| |
鐵粉壓塊機
“鑫源”牌鐵粉壓制后的鐵粉直接裝罐，燒制成的海綿鐵，具有產量高，節能，密度大等優點。
鐵粉壓塊機本機具有動力機構和電器系統，并采用按鈕集中控制，操作簡單，機動性能好。
After the machine after the iron powder to suppress the direct canning, firing into the sponge iron, with high output, energy saving, high density and so on.
The machine has an independent power sector and electrical systems, and centralized control with buttons, simple operation, good mobility.
| 技術參數(Technique parameter ) | ||||||
| 型號 | 模具尺寸(Die Size) | 密度(Density) | 產量(output) | 功率(POWER) |
| |
| 外圓 | 內圓 |
| ||||
| XY32-150 | 150 | 70 | 3-4 | 1500-2200 | 15 |
|
| XY32-200 | 150 | 70 | 3-4 | 1600-2200 | 15 | |
海綿鐵生產線工藝流程圖：
鐵粉機相關圖片：
所有評論僅代表網友意見，與本站立場無關。