詳細描述

MAS6503 采用比例式 AD 轉換器原理，采用 delta-sigma (DS) 轉換技術，具有非常好的噪聲性能。其電流消耗極低（18.3 μA，在分辨率下每秒進行一次壓力轉換，包括傳感器電橋電流），并且可以在 1.8 V 至 3.6 V 的低電源電壓下運行，這使其成為連接壓電器件的理想解決方案。功耗關鍵的便攜式應用中的電阻傳感器。ADC 的有效位數 (ENOB) 為 17.4 位。DS 轉換器的過采樣率 (OSR) 有五個值可供選擇，以進一步優化轉換精度、速度和電流消耗。MAS6503 還具有電源電壓監控模式，這在電池供電系統中尤其有用。使用內置傳感器采樣開關，外部傳感器橋不僅可用于檢測壓力，還可用于檢測溫度。MAS6503 通過標準的 2 線 I2C 串行總線接口進行通信。

The MAS6503 uses a ratiometric AD-converter principle employing a delta-sigma (DS) conversion technique, giving very good noise performance. Its current consumption is extremely low (18.3 μA, one pressure conversion in a second at maximum resolution and including sensor bridge current) and it can operate at low supply voltage from 1.8 V to 3.6 V which makes it an ideal solution for interfacing a piezo-resistive sensor in power consumption critical portable applications. The effective number of bits (ENOB) of the ADC is 17.4 bits. The over sampling ratio (OSR) of the DS-converter has five values to choose from for further optimization between conversion accuracy, speed and current consumption. MAS6503 also features supply voltage monitoring mode which is especially useful in battery operated systems. The external sensor bridge can be used to sense not only pressure but also temperature, using the built-in sensor sampling switches. The MAS6503 communicates via a standard 2-wire I2C serial bus interface.

規格書和資料

Data SheetPress release