機床主要特點(Main Characteristics)

　　◆ 機床采用砂輪架固定、導輪架移動布局；
　　◆ 砂輪為懸臂式結構，砂輪主軸采用多片式長軸瓦動壓油膜軸承；
　　◆ 導輪為懸臂式結構，導輪主軸前端采用整體1：30錐體滑動軸承，后端采用高精度滾動軸承；
　　◆ 導輪架進給導軌采用燕尾形滾針導軌，進給用差動絲桿；
　　◆ 導輪架調速采用交流變頻調速；
　　◆ 機床配備切入機構；
　　◆ 托架安裝面采用T型槽定位。
　　◆ The layout of the machine is thst its grinding wheethead is fixed and regulating wheelhead is movable.
　　◆ The grinding wheel spindle is designed in cantilever structure and supported on multiple long-secment hydrodynamic oil-film bearing.
　　◆ The regulating wheel spindle is also designed in cantilever structure and supported on conlcal sliding bearing with 1:30 taper in the front and rolling bearing on the back.
　　◆ The regulating wheel feed slide is supported on dovetail needle roller guideway and a differential leadscrew is 　used for performing feed motion.
　　◆ AC frequency converter is used ofr changing the regulating wheel speed infinitely.
　　◆ The machine is equipped with the plunge-cut mechanism.
　　◆ The mounting surface of the workrest is located with T-slot.

主要用途及適用范圍(Main Appllcatlon)

　　主要用來對各種圈類、軸類零件的圓柱面進行通磨。對各種階梯、錐形和圓形旋轉面進行半自動切入磨削。
　　The machine is mainly used for through-feed grinding of cylindrical surface of ring-ａnd shat-type parts,as well as for plunge-cut grinding of various stepped,conical and cylindrical surfaces semi-automatically.

地基安裝圖

主要規格與參數