銅棒中頻感應加熱爐

一、銅中頻感應加熱爐說明

的銅桿中頻感應加熱爐是感應加熱爐進行加熱銅桿，這是從感應加熱爐進行加熱鋼零件不同，所以制造商需要有豐富的經驗和成熟的制造經驗有色金屬感應加熱。銅和銅合金的鍛造溫度范圍很窄，加熱的感應器設計得非常*，可以避免銅棒過熱并導致晶粒過度生長。另外，設計時要注意銅棒的表面不能燃燒，沒有夾子，壓痕，表面不能有明顯的色差。

B，技術要求

1.生產線名稱：KGPS-150kW / 2.5銅棒中頻感應加熱爐

2.生產線數：1臺

3.銅棒中頻感應加熱爐用途：用于銅棒加熱

4.銅棒中頻感應加熱爐主要工藝參數及技術要求：

4.1加熱工藝要求：

4.1.1銅棒材質：銅棒

4.1.2銅棒規格范圍：Φ50x 78 MM

4.1.3加熱溫度：900℃

4.1.4生產率：每分鐘5件，≤400kg / h

4.1.5正常運行時加熱穩定，各段之間的溫度波動在±15℃以內；的溫度差的的銅棒加熱后軸向：（端和尾部）≤30℃;徑向（核心）≤30℃下

4.1.6冷卻水供應系統壓力大于0.5MPa（正常水壓大于0.4MPa），高溫為60℃，相應的軟管壓力和接口也需要按安全標準放大。

Copper rodMedium frequency induction heating

A,copper medium frequency induction DESCRIPION

hecopper rod medium frequency induction heating isan induction heating forheatingcopper rods, which is different from the induction heating for heating steel parts, so the manufacturer needs to have the experience and maturemanufacturing experience ofnonferrous metal induction heating.Copper and copper alloys have a very narrow forging temperature range, and the heated inductors are designed to be extremely precise, avoidingoverheating of thecopper rodsａnd causing excessive grain growth.In addition, the design should pay attention to thesurface of thecopper rodcan not be burned, no clips, indentations, the surface can not have obvious color difference.

B, technical requirements

1.Production line name:KGPS-150kW/2.5copper rod medium frequency induction heating

2.Number of production lines:1set

3.Copper rod medium frequency induction heating use: forcopper rodheating

4.Main process parameters and technical requirements ofcopper rod medium frequency induction heating :

4.1Heating process requirements:

4.1.1Copper rodmaterial:copper rod

4.1.2Copper rodspecification range: Φ50x78MM

4.1.3Heating temperature:900℃

4.1.4Productivity:5piecesper minute, ≤400kg/h

4.1.5 heheating is stable during normal operation, the temperature fluctuation between each section is within ±15℃; thetemperature differenceof thecopper rodafter heating: axial(end and tail)≤30℃; radial (core) ≤30℃

4.1.6Cooling water supply system pressure is greater than0.5MPa(normal water pressure is greater than0.4MPa),high temperature is60℃, thecorresponding hose pressure and interface also need to be scaled up to safety standards.

哪個廠家的質量好?生產廠家西格馬質量好，售后完善。