棒料，圓鋼加熱爐

中頻感應加熱設備的主要工藝參數和技術要求如下：

1.生產線名稱：KGPS350KW / 4.0KHZ中頻感應加熱設備

2.生產線數：3臺

3.設備用途：圓鋼，圓鋼加熱

4.中頻感應加熱設備主要工藝參數及技術要求：

4.1加熱工藝要求：

4.1.1圓鋼材質：加熱：Φ26×200mm，Φ45×105mm圓鋼，加熱溫度：1150℃，生產能力：700KG圓鋼

4.1.2圓鋼規格范圍：

4.1.3加熱溫度：1150℃

4.1.4生產：每小時約700KG的較大圓鋼。

4.1.5正常運行時加熱穩定，各段之間的溫度波動在±20℃以內；圓鋼加熱后的溫差：軸向≤±20℃;徑向（核心工作臺）≤±20℃

4.1.6額定溫度中頻功率因數大于0.90

4.1.7冷卻水供應系統的壓力大于0.25MPa（正常水壓大于0.1MPa），較高的溫度為60℃，相應的軟管壓力和接口也需要按安全標準進行調整。

Roundbar, round steelmedium frequency induction heating equipment

hemain process parameters and technical requirements of themedium frequency induction heating equipmentare as follows:

1.Production line name:KGPS350KW/4.0KHZmedium frequency induction heating equipment

2.Number of production lines:3sets

3.Equipment use: round bar, round steelheating

4.Main process parameters and technical requirements of medium frequency induction heating equipment:

4.1Heating process requirements:

4.1.1Round steelmaterial:heating:Φ26×200mm,Φ45×105mm round steel, heating temperature: 1150 ° C, production capacity: 700KG round steel

4.1.2Round steelspecification range:

4.1.3Heating temperature:1150 ° C

4.1.4Production: Largerround steel ofabout700KGper hour.

4.1.5 heheating is stable during normal operation, the temperature fluctuation between each section is within±20 ℃; thetemperature differenceofround steelafter heating: axial≤±20 ℃; radial (core table)≤±20 ℃

4.1.6Rated intermediate frequency power factor isabove0.90

4.1.7 hecooling water supply system pressure is greater than0.25MPa(normal water pressure is greater than0.1MPa), thehigher temperature is60℃, and thecorresponding hose pressure and interface also need to be scaled up to safety standards.

哪個廠家的質量好?生產廠家西格馬質量好，售后完善。