特點
（1）雙氣壓缸結構設計，使機器操作更加平穩，作動受力更加平均，流體輸出更順暢。
（2）特殊的壓力板設計，能使壓力板與容器更能緊密結合，可輕松應對具有錐度之容器及高粘度流體，并可大幅減產容器內部、底部之殘余材料。
（3）柱塞式設計無橡膠油封，可抽取潤滑脂或油墨等特殊流體物質。
（4）使用氣壓缸輔助加壓，可用于高粘度潤滑脂或是一般泵浦不易抽取之潤滑脂。
（5）大輸出流量設計，適用于各種生產線及大流量者使用。
（6）適用各國廠牌5加侖原裝黃油桶。
（7）泵浦本體材質采用鋁合金成型。
用油
（1）一般00#~3#黃油均能順暢注入。
（2）特殊潤滑脂適用范圍請洽本公司。
Feature
(1) cylinder structure design pressure double air, make the machine more stable, the actuating force more average, fluid output more smoothly.
(2) the design pressure plate special, can cause the pressure plate and the container can be more closely combined, can easily deal with taper container and high viscosity fluid, and a significant reduction of residual material inside, at the bottom of container.
(3) the plunger design without rubber seal, extracting grease or ink special fluid substance.
(4) the use of pneumatic cylinder auxiliary pressure, can be used for high viscosity lubricating grease or is generally not easy extraction of lubricating grease pump.
(5) and large output flow design, suitable for various production lines and large flow using.
(6) for each country to make 5 gallons of the original grease bucket.
(7) the pump body is made of aluminum alloy molding.
Grease usage
(1) the general 00#~3# butter can smoothly into the.
(2) the application of special grease range for the company.

為客戶提供全面的定量注油、填充、分裝、噴涂方案，滿足廣大客戶的生產需求，大大提高工作效率！克服生產上的重大挑戰！

產品優點定量精準！調節方便！控制簡單！提高效率！目前公司定量閥型號有0.5克、1克、5克、10克、30克、20到200克、100到500克、200到1000克！

可根據客戶特殊要求設計專業的配套供油設備系統！