ZLEK系列可傾式燃氣集中熔化爐

ZLEK series tilting type gas centralized melting furnace

產品特點：

1.爐襯采用高密度澆注料一體成型，隔熱材料使用輕質絕熱磚、陶瓷纖維板及納米材料復合而成，其具有爐體壽命長、保溫效果好、蓄熱量小、升溫速度快等特點，爐壁溫升≤35°℃。

2.此設備采用半鋁料半侵泡熔化結構，燒損低，熔化速度快。

3.采用進口溫度控制器,PID自動調節控制,鋁液及爐氛雙重控溫。

4.使用蓄熱式燃燒器，PLC控制配合空燃比例調節，可準確控制爐內氣氛溫度，燃燒充分，安全可靠。

5.配備火焰檢測、壓力檢測、自動控溫、液面控制、故障報警等功能。

6.自動化程度高，液壓驅動傾倒出水，不需要人工堵流，操作簡單,安全可靠，可大大降低發生安全事故的可能性。

Product features:

1.爐襯采用高密度澆注料一體成型，隔熱材料使用輕質絕熱磚、陶瓷纖維板及納米材料復合而成，其具有爐體壽命長、保溫效果好、蓄熱量小、升溫速度快等特點，爐壁溫升≤35°℃。

1. The furnace lining is integrally formed with high-density castable, and the thermal insulation material is composed of light thermal insulation brick, ceramic fiber board and nano materials. It has the characteristics of long furnace life, good thermal insulation effect, small heat storage capacity and fast heating speed, and the temperature rise of furnace wall is ≤ 35 °℃.

2.此設備采用半鋁料半侵泡熔化結構，燒損低，熔化速度快。

2. The equipment adopts semi aluminum material semi bubble melting structure, with low burning loss and fast melting speed.

3.采用進口溫度控制器,PID自動調節控制,鋁液及爐氛雙重控溫。

3. Imported temperature controller, PID automatic regulation control, dual temperature control of molten aluminum and furnace atmosphere are adopted.

4.使用鋁合金專用中高速燒嘴，配備燃料助燃空氣同步調節裝置，

4. Using regenerative burner, PLC control and air-fuel ratio adjustment can accurately control the atmosphere temperature in the furnace, with sufficient combustion, safety and reliability.

5.配備火焰檢測、壓力檢測、自動控溫、液面控制、故障報警等功能。

5. Equipped with flame detection, pressure detection, automatic temperature control, liquid level control, fault alarm and other functions.

6.自動化程度高，液壓驅動傾倒出水，不需要人工堵流，操作簡單,安全可靠，可大大降低發生安全事故的可能性。

6. High degree of automation, hydraulic drive dumping water, no manual flow blocking, simple operation, safe and reliable, which can greatly reduce the possibility of safety accidents.

技術參數

注：以上尺寸僅供參考。以上規格為標準形式，若有特殊需求可按客戶需求設計制作。

Note: the above dimensions are for reference only. The above specifications are in standard form. If there are special needs, they can be designed and made according to customer needs.