ZLEX系列蓄熱式燃氣熔化爐（反射爐）
ZlEX series regenerative gas melting furnace (reverberatory furnace)
產品特點：
1、爐門形式：垂直爐門和斜爐門
2、加熱方式：爐門加料（可增加側井鋁液泵），用于鋁屑碎料等小塊料熔化
3、采用蓄熱式結構，爐體組成：爐本體+蓄熱式燃控系統，蓄熱系統采用新型三蓄熱結構，可大大降低煙氣溫度，不需要對排煙管路做過多保溫措施，并可降低除塵系統的耐溫要求。
3、容量：5T、10T、15T、20T、25T、35T、40T、50T、65T、75T；可根據客戶實際需求設計制造。
4、能耗（50-62m3天然氣/噸鋁）:5-15T爐≤62;20-35T爐≤58;40T以上爐≤55
5、加料、扒渣方便，布料均勻，熔化速度快。物料入爐后不會有較大的落差，不易損壞爐襯。大爐子可開設兩個爐門，使布料更加均勻，不致于出現爐門口堆料現象。
6、自動化程度高，一鍵點火，自動控溫，大小火變頻調節；
7、爐子壽命長，澆注料采用進口品牌分倉砌筑而成，倉與倉之間設有凹形楔口，即可適應內襯材料的熱膨冷縮變化，亦可防鋁液滲漏，同時還有的保溫效果。施工時采用的施工工藝，確保了各種工況下，爐襯均不會出現癱塌、傾倒現象。
8、燃燒安全性高:采用pLC自動控制，配置熄火自動保護，自動吹掃功能，火焰自動檢測。觸摸屏界面：鋁液、爐膛、排煙溫度，燃氣流量、風機頻率等各項參數一目了然。
Product features:
1. Furnace door form: vertical furnace door and inclined furnace door
2. Heating mode: furnace door charging (side well aluminum pump can be added) for melting small pieces of aluminum chips and broken materials
3. The heat storage structure is adopted, and the furnace body is composed of furnace body + heat storage fuel control system. The heat storage system adopts the latest three heat storage structure, which can greatly reduce the flue gas temperature, do not need to take too many thermal insulation measures for the exhaust pipe, and reduce the temperature resistance requirements of the dust removal system.
3. Capacity: 5T, 10t, 15t, 20t, 25t, 35t, 40t, 50t, 65t, 75t; It can be designed and manufactured according to the actual needs of customers.
4. Energy consumption (50-62m) 3 Natural gas / ton of aluminum): 5-15t furnace ≤ 62; 20-35t furnace ≤ 58; Furnace above 40t ≤ 55
5. Convenient feeding and slag removal, uniform distribution and fast melting speed. The materials will not have a large drop after entering the furnace, which is not easy to damage the furnace lining. Two furnace doors can be set for the large furnace to make the distribution more uniform and avoid stacking at the furnace door.
6. High degree of automation, one key ignition, automatic temperature control, large and small fire frequency conversion adjustment;
7. The furnace has a long service life. The castable is made of imported brａnd warehouse masonry. There is a concave wedge between the warehouses, which can adapt to the thermal expansion and cold contraction of the lining material, prevent the leakage of molten aluminum, and have excellent thermal insulation effect. During construction, international advanced construction technology is adopted to ensure that the furnace lining will not collapse and collapse under various working conditions.
8. High combustion safety: it adopts PLC automatic control, equipped with automatic flameout protection, automatic purging function and automatic flame detection. Touch screen interface: various parameters such as aluminum liquid, furnace, smoke exhaust temperature, gas flow, fan frequency, etc. are clear at a glance
所有評論僅代表網友意見，與本站立場無關。